沖壓件資訊 當前位置:首頁>沖壓件資訊>公司新聞

散熱片加工沖壓件材料的選用條件及硬度檢測方式

網址:www.yuandingziguan.com  2019-08-13  作者:admin    閱讀:

散熱片加工沖壓件材料的選用條件及硬度檢測方式: 有一大部分不銹鋼外殼屬于沖壓件,因為它是通過沖壓工藝制造而成的,除了工藝的要求外,對于材料選擇也給出了相應的條件。材料的厚度、性質等都將影響沖壓中各個參數的設置,從而決定了沖壓件的成型質量。
Selection conditions and hardness testing methods of stamping materials for heat sink processing: a large part of stainless steel shell belongs to stamping parts, because it is manufactured by stamping process. In addition to process requirements, the corresponding conditions for material selection are also given. Thickness and properties of materials will affect the setting of parameters in stamping, which determines the forming quality of stamping parts.
在采用不銹鋼為外殼的沖壓材料外,在實際設計中還應盡量采用彈壓卸料板,因為彈壓卸料模具操作時比固定卸料模具方便,操作者可以看見條料在模具中的送進動作。而且彈壓卸料板卸料時對條料施加的是柔性力,不會損傷工件表面。一般情況下,只有當彈壓卸料板卸料力不足的時候,才會在制作沖壓件時改用固定卸料板。
In addition to the stamping material with stainless steel shell, the elastic discharging plate should be used as far as possible in the actual design, because the operation of the elastic discharging die is more convenient than that of the fixed discharging die, and the operator can see the feeding action of the strip in the die. Moreover, the elastic discharging plate exerts a flexible force on the strip during discharging, which will not damage the surface of the workpiece. Generally speaking, only when the unloading force of the elastic discharging plate is insufficient, the fixed discharging plate will be used when making stamping parts.

電話
13832754303

无码国产AV西瓜影音,免费国产AⅤ剧情视频,国产无遮挡又黄又爽高潮久久,国产一级毛片无码高潮